Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Uživatelský manuál stáhnout pdf (Strana 72)

Configuring SNMP, BOOTP, DHCP, and RARP Services

2-10

Click on the interface for which you want to edit BOOTP parameters.

3. Edit the parameters you want to change.

Use the descriptions that follow as a guide.

4. Click on Apply to implement your changes.

You can also perform the following procedures from this window:

5. Click on Done to exit the window.

Parameter: Enable/Disable

Default: Enable

Options: Enable

| Disable

Function: Speciﬁes whether BOOTP is active on the network interface.

Instructions: Select Enable to enable BOOTP on the network interface.

Select Disable to disable BOOTP on the network interface.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.8.3.1.1.2

Parameter: Hops

Default: 4

Range: 1 to 16 hops

Function: Speciﬁes the maximum number of hops from the client to the server. A

hop is the logical distance between two devices. If the value in the hops

ﬁeld of a BOOTREQUEST packet is greater than the number you specify

for this parameter, the router drops the packet.

Instructions: Accept the default of 4 hops or specify a number between 1 and 16,

inclusive.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.8.3.1.1.5

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 107 108

Žádné komentáře

Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Uživatelský manuál Strana 72