Avaya Configuring SNMP, RMON, BOOTP, DHCP, and RARP Services Uživatelský manuál Strana 130

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 192
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 129
Configuring SNMP, RMON, BootP, DHCP, and RARP Services
5-4 117362-A Rev. A
To specify a minimum timeout value, complete the tasks in the following table.
Specifying the Relay Mode for Packet Forwarding
BootP and DHCP use the BootP relay agent to forward packets. You can allow the
BootP relay agent to forward BootP , DHCP packets, or both by specifying the
Pass Through Mode parameter. The default setting is BootP, which allows the
interface to transmit only BootP packets. Be sure to change the setting if you want
to transmit DHCP packets.
To set the relay mode on a BootP interface, complete the tasks in the following
table.
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose Protocols.
The Protocols menu opens.
2. Choose IP. The IP menu opens.
3. Choose BOOTP. The BOOTP menu opens.
4. Choose Relay Agent Interface Table. The BOOTP Relay Agent Interface Table
window opens. This window lists all the IP
interfaces that you have configured for
BOOTP services on the router.
5. Set the Timeout Secs.
parameter.
Click on Help or see the parameter
description on page
A-21.
6. Click on Apply.
7. Click on Done. You return to the Configuration Manager
window.
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose Protocols.
The Protocols menu opens.
2. Choose IP. The IP menu opens.
(continued)
Zobrazit stránku 129
1 2 ... 125 126 127 128 129 130 131 132 133 134 135 ... 191 192

Komentáře k této Příručce

Žádné komentáře