Avaya Remote Access BCM Rls 6.0 Uživatelský manuál stáhnout pdf (Strana 10)

Remote Access

10 NN40011-032 Issue 1.2 BCM Rls 6.0

7. To access Dial-up interfaces Configuration, Resources, Dial-up

Interfaces, and access required tab to configure required remote

access settings.

Remote Access Service

Remote Access Service (RAS) allows a client system to dial a telephone

number and establish an IP link with a BCM. This link is a connection across a

telephone network, between the modem on the client system and the modem

on the BCM. Once this link is established, the client can run IP applications to

access the BCM system’s OAM server, Web Page Server or BCM Monitor.

A user must provide credentials to establish the PPP connection. The

credentials used must match the ones of a BCM account which has the PPP

This section provides an overview of how to configure the Remote Access

Service. Specific field configurations can be found in the later sections of this

guide.

1. The modem or ISDN interface must be enabled for a connection to take

place. Click the Modem Dial-In Parameters or ISDN Dial-In

Parameters tab and check the Enable modem dial-in or Enable ISDN

dial-in tick box.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

Žádné komentáře

Avaya Remote Access BCM Rls 6.0 Uživatelský manuál Strana 10