
37
BCM 200/400 Release 3.7 configuration
This chapter describes configuration procedures for the Business
Communications Manager (BCM) 200 and 400 Release 3.7 systems.
BCM 200/400 Release 3.7 configuration procedures
The sequence of BCM 200/400 Release 3.7 configuration procedures is as
follows:
•
"Verifying incoming VoIP trunks provisioning" (page 37)
• "Adding keycodes files" (page 38)
•
"Adding a functionality-specific keycode" (page 38)
•
"Configuring VoIP H.323 trunk media parameters" (page 39)
•
"Configuring VoIP SIP trunk media parameters" (page 40)
•
"Configuring H.323 local Gateway IP parameters" (page 41)
•
"Configuring SIP local Gateway IP parameters" (page 42)
•
"Configuring SIP subdomains" (page 43)
•
"Configuring remote H.323 Gateways" (page 44)
•
"Configuring remote SIP endpoints" (page 45)
•
"Configuring VoIP lines for outgoing calls" (page 46)
•
"Configuring target lines for incoming calls" (page 49)
•
"Configuring telephones to access outgoing VoIP lines" (page 50)
Verifying incoming VoIP trunks provisioning
Perform this procedure to verify that incoming VoIP trunks are provisioned.
Step Action
1
Log on to the Unified Manager.
2
Select the BCM>System>Licensing heading.
The Licensing Setting page appears.
Enterprise: Common
Solution Integration Guide for Multisite Business Communications Manager Systems
NN49000-303 01.01 Standard
Release 4.0, 3.7 29 June 2007
Copyright © 2007, Nortel Networks
.
Komentáře k této Příručce