Avaya Auto Voice VLAN Detection and Configuration SMB Business Ethernet Switch 50 Uživatelský manuál stáhnout pdf (Strana 11)

Technical Note: Auto Voice VLAN Detection and Configuration

Step 5: Connect IP Phone to BES50

Connect a compatible Nortel IP phone to the port with auto voice VLAN detection enabled (e.g. port 5 in the

previous example).

Step 6: Check Auto Voice VLAN Detection Status

After the IP phone is connected, wait for the IP phone and the BES50 switch discover each other. The

following simple steps can be used to check whether the Voice VLAN is automatically configured when the

IP phone is connected.

VLAN Membership

• From the WebUI, navigate to the Applications > VLAN > 802.1Q VLAN Current Table panel.

• From the pull down menu, select the voice VLAN ID (in our previous example the VLAN ID is 10)

• Check and ensure that the port in which the IP phone is connected to (in our previous example port 5) is

included in the Egress Ports list but not included in the Untagged Ports list.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17 18

Žádné komentáře

Avaya Auto Voice VLAN Detection and Configuration SMB Business Ethernet Switch 50 Uživatelský manuál Strana 11