
Configuring AppleTalk Services
4-10 117366-A Rev. A
Parameter: WAN MAC Address
Default: None
Options: Any valid MAC address
Function: Specifies the SMDS individual MAC address or the Frame Relay MAC
address for this interface.
Instructions: If this interface is of circuit type SMDS, or for specific Frame Relay
networks, enter the MAC address . Note that the length of the address you
specify must be correct for the circuit type. For example, for a Frame
Relay circuit with 2-byte DLCIs, specify a 2-byte WAN broadcast
address.
MIB Object ID: 1.3.6.1.4.1.18.3.5.4.3.1#10
Parameter: WAN Broadcast Address
Default: None
Options: Any valid broadcast address
Function: Specifies the Frame Relay or SMDS group broadcast address for this
interface.
Instructions: If this interface is of circuit type Frame Relay or SMDS, enter its
broadcast address. Note that the length of the address you specify must be
correct for the circuit type. For example, for a Frame Relay circuit with
2-byte DLCIs, specify a 2-byte WAN broadcast address.
MIB Object ID: 1.3.6.1.4.1.18.3.5.4.3.1#80
Komentáře k této Příručce