Avaya Configuring ATM Services Uživatelský manuál Strana 203

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 268
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 202
Site Manager Parameters
114056 Rev. A A-53
Parameter: Enable
Path: Configuration Manager > Protocols > ATM > ILMI Signaling
Default: Enable
Options: Enable
| Disable
Function: Enables or disables ILMI on this interface.
Instructions: Accept the default, Enable, if you want ILMI to remain enabled on this
interface. Select Disable if you do not want ILMI enabled on this interface.
MIB Object ID: 1.3.6.1.4.1.18.3.4.23.1.9.1.2
Parameter: ILMI VPI
Path: Configuration Manager > Protocols > ATM > ILMI Signaling
Default: 0
Options: 0 through 255
Function: Defines the virtual path identifier (VPI) for the ILMI VC.
Instructions: Accept the default, 0, or enter a value from 0 through 255
MIB Object ID: 1.3.6.1.4.1.18.3.4.23.1.9.1.8
Caution: The signaling VC (0/5) and the ILMI VC (0/16) are reserved. These
VCs remain in an operational state as long as signaling is enabled on the ATM
interface. Because most ATM devices use these VPI/VCI pairs for signaling,
we recommend that you not change these values.
Zobrazit stránku 202
1 2 ... 198 199 200 201 202 203 204 205 206 207 208 ... 267 268

Komentáře k této Příručce

Žádné komentáře