Avaya Configuring Ethernet, FDDI, and Token Ring Services Uživatelský manuál Strana 34

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 94
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 33
Configuring Ethernet, FDDI, and Token Ring Services
2-10 117344-A Rev. A
Using the BCC
To enable hardware filtering, access an existing Ethernet line service and enter:
hardware-filter enable
To disable hardware filtering, access an existing Ethernet line service and enter:
hardware-filter disable
For example, to enable hardware filtering:
box> ethernet slot 13 connector 1
ethernet/13/1> hardware-filter enable
Using Site Manager
Complete the tasks in the following table to enable or disable hardware filtering.
The Transmit Queue Length
The transmit queue length determines the number of buffers that can be used to
transmit data. Set the value from 0 to 255 to determine the transmit queue length.
If you set the value larger than the compiled ring size, the router will truncate the
value at that size.
You can set the transmit queue length only by using the BCC.
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose an XCVR Connector.
The Edit Connector window opens.
2. Choose Edit Line. The Edit CSMA/CD Parameters window
opens.
3. Set the Hardware Filter parameter. Click
on Help or see the parameter description
on page A-3.
4. Click on OK. Site Manager returns you to the Edit
Connector window.
5. Click on Done. Site Manager returns you to the
Configuration Manager window.
Zobrazit stránku 33
1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 93 94

Komentáře k této Příručce

Žádné komentáře