
Configuring IP Multicasting and Multimedia Services
5-4
117355-C Rev 00
Configuring MOSPF Globally
Bay Networks does not support dynamic configuration of MOSPF/QOSPF. After
making local configuration changes, restart OSPF by disabling and reenabling it.
If you enable MOSPF, do not run other multicasting protocols on any OSPF
interfaces, even if MOSPF is disabled on those interfaces (that is, even if you set
the Multicast Forwarding Parameter to blocked). If you want to disable MOSPF
on a network, use Site Manager to disable MOSPF on all routers in the network.
If you are configuring an OSPF network with both MOSPF and non-MOSPF
routers, set the non-MOSPF routers to priority 0 so that the MOSPF routers can
become designated router and backup designated router (DR/BDR), which is
necessary for MOSPF to work.
You can use Site Manager to add MOSPF extensions to OSPF.
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
OSPF/MOSPF
. The OSPF menu opens.
4. Choose
Global
. The Edit OSPF Global Parameters
window opens.
5. Set the
Multicast Extensions
parameter.
Click on
Help
or see the parameter
description on page A-33.
6. Click on
OK
. You return to the Configuration Manager
window.
Komentáře k této Příručce