Avaya Configuring IP Multicasting Services Uživatelský manuál Strana 115

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 126
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 114
Site Manager Multicast Parameters
114064 Rev. B A-25
Parameter: Route Exploration Capability
Path: Configuration Manager > Protocols > IP > ST2 > Neighbors
Default: No
Options: Yes
| No
Function: Specifies whether the neighbor is capable of route exploration.
Instructions: Determine this characteristic of the ST2 neighbor and supply the proper value.
MIB Object ID: 1.3.6.1.4.1.18.3.5.16.1.2.3.1.2.4
Parameter: Hello Protocol
Path: Configuration Manager > Protocols > IP > ST2 > Neighbors
Default: Enable
Options: Enable
| Hello When Stream Active | Disable
Function: Specifies whether the router should send hello messages to the neighbor. The
parameter also specifies the type of hello procedure.
Instructions: Select Enable to use the normal Bay Networks hello procedure. Select Hello
When Stream Active to use the hello procedure only when a stream is running
to a neighbor. Select Disable to disable the feature on the interface.
MIB Object ID: 1.3.6.1.4.1.18.3.5.16.1.2.3.1.2.5
Parameter: Neighbor Type
Path: Configuration Manager > Protocols > IP > ST2 > Neighbors
Default: Local
Options: Local
| Tunnel
Function: Specifies the type of connection to this neighbor.
Instructions: Set this parameter to Tunnel if the router is connected to the neighbor via an
ST2 tunnel.
MIB Object ID: 1.3.6.1.4.1.18.3.5.16.1.2.3.1.2.6
Zobrazit stránku 114
1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 125 126

Komentáře k této Příručce

Žádné komentáře