Avaya DHCP BCM Rls 6.0 Uživatelský manuál stáhnout pdf (Strana 9)

DHCP

NN40011-027 Issue 1.2 BCM Rls 6.0 9

Flow Chart

Use the flow chart below to determine which sections of the guide to use.

Contact the network administrator and obtain the DHCP

requirements of the network: refer to the Required

Information section of this guide.

Ensure the BCM LAN IP Address is compatible with the

DHCP requirements: refer to the BCM Customer LAN

IP Address section of this guide.

Set the DHCP mode and enter IP information to be

issued to DHCP clients: refer to the General Settings

section of this guide.

To properly prepare the BCM for DHCP, ensure the

BCM is not connected to the network.

Set the Address Range to be issued to DHCP clients:

refer to the Setting the Address Ranges section of

this guide.

Will IP Phones be used on the BCM system?

Check the Published IP Address: refer to the

Published IP Address section of this guide.

Connect the BCM to the network

Yes

Check the IP Phone settings: refer to the Setting

the IP Terminal Details section of this guide.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 25 26

Žádné komentáře

Avaya DHCP BCM Rls 6.0 Uživatelský manuál Strana 9