Avaya Ethernet Link Modules in BN Platforms Uživatelský manuál stáhnout pdf (Strana 30)

Installing Ethernet Link Modules in BN Platforms

3-2 114946-A Rev. A

Figure 3-1. Ethernet LEDs

Table 3-1. Functions of the Ethernet LEDs

LED Function

COL Indicates a collision detection.

RCVR, RCVR1 or RCVR2 Indicates that the respective port is receiving data.

XCVR1 or XCVR2 Indicates the presence of Ethernet trafﬁc (either transmitting or

receiving) on the respective port.

XMT Indicates that the respective port is transmitting data.

FAIL Indicates one of the following:

• Diagnostic testing is in progress. Diagnostic testing occurs when

you cold-start the module. You cold-start the module when you

cycle power, issue the diags command from the Technician

Interface, or hot-swap the link module. This LED blinks three

times and goes out when the diagnostic testing terminates

successfully.

• Power-up diagnostic testing failed and the link module is waiting

for an automatic attempt to reinitiate diagnostic testing. If the FAIL

LED turns on again, call the Bay Networks Technical Response

Center.

• A link module hardware problem exists and the link module is

waiting for an automatic attempt to reinitiate diagnostic testing. If

the FAIL LED turns on again, call the Bay Networks Technical

Response Center.

XCVR2

ENET

5405

XCVR1

FAIL

XMIT

COL

RCVR

XCVR2

XMIT

COL

RCVR

XCVR1

XCVR4

XCVR1

FAIL

QENET

XCVR2

XCVR3

XCUR1

FAIL

RCUR2

RCUR1

ENET

XCUR2

ENT0002A

1 2 ... 25 26 27 28 29 30 31 32

Komentáře k této Příručce

Žádné komentáře

Avaya Ethernet Link Modules in BN Platforms Uživatelský manuál Strana 30

Komentáře k této Příručce

Související produkty a manuály pro Sítě Avaya Ethernet Link Modules in BN Platforms