Avaya Troubleshooting Routers Průvodce řešením problémů Strana 45

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 266
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 44
Introduction
117379-A Rev. A 1-21
Using Inbound Telnet to Access the Technician Interface
Versions 7.60 and later allow you to use Telnet to establish a Technician Interface
session with a router.
To make Telnet a configurable option in the Protocols menu, create and enable
TCP and the Telnet server from the Configuration Manager window as follows:
1. Choose Protocols > Global Protocols > TCP > Create TCP.
2. Choose Protocols > Global Protocols > Telnet Server > Create Telnet
Server.
The Telnet Configuration window opens.
3. Change the settings, or use the default settings, then click on OK.
Unlike the Series 5 software, more than one user can establish an inbound or
outbound Telnet session with a router at the same time. However, Bay Networks
does not recommend multiple Telnet sessions because the memory required to
maintain multiple TCP connections can affect system performance.
For detailed instructions on how to establish a Telnet connection to a router, see
Using Technician Interface Software.
To resolve problems, see “Troubleshooting Telnet, FTP, and TFTP” in Chapter 6.
Note: Bay Networks strongly recommends that you learn how to establish an
inbound Telnet session with the router in order to troubleshoot problems from
a remote site.
Zobrazit stránku 44
1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 265 266

Komentáře k této Příručce

Žádné komentáře