
How to... (Client)
65
Table of Values for Summary Reports
Jitter (ms) Round Trip Time (ms) Loss (%)
0 to 50ms 0 to 180ms 0 to 10%
Acceptable
Conversation was
smooth.
Acceptable
No delay between each
endpoint.
Acceptable
No drop out in conversation.
50 to 150ms 180 to 500ms 10 to 30%
Warning
Crackling, static or
intermittent delay could be
reported.
Warning
Slight pause in the conversation
at the lower end of the range to
more lengthy delays at the top
end of the range could be
reported.
Warning
Drop out and missing parts of
the conversation could be
reported.
> 150ms > 500ms > 30%
Not Acceptable Not Acceptable Not Acceptable
See Also
About Detailed Reports
About Summary Reports
About Session Properties
Interpreting the Values Using Detailed Reports
Search for a Specific Phone Number, QoS Values or Network Address
Y-axis
The Y-axis on the Detailed Reports line graph is the vertical area of the report, covering the top to
the bottom of the graph. The top of the Y-axis represents the upper levels for each of the QoS
parameters and the bottom of the Y-axis represents the lower levels. You can point your mouse
at the samples on the line graph and the exact time and QoS value will display. For more detailed
information see the topic on About Detailed Reports and/or Interpreting Detailed Reports.
Komentáře k této Příručce