Avaya FRE-2 Uživatelský manuál stáhnout pdf (Strana 32)

Upgrading the FRE-2 Processor Module

10 108305 Rev. D

Figure 9. Locking a SIMM into Place

Upgrading from 8 MB or 16 MB to 32 MB

If you are upgrading a FRE-2 or FRE-2/060 processor module from 8 or 16 MB to

32 MB, your upgrade kit contains two identical 72-pin SIMMs and one 30-pin

SIMM.

To upgrade the FRE-2 processor module to 32 MB:

1. Using Figure 7 as a reference, locate SIMM sockets SI 1, SI 2, SI 3, SI 4,

and U85 on your FRE-2 processor module.

Depending on the current conﬁguration, there will be SIMMs populating

some, or all, of these sockets.

2. To remove any SIMMs currently populating sockets SI 1, SI 2, SI 3, SI 4,

or U85:

a. Pull back on the retainers grasping the edges of the SIMM to release

it.

b. Gently lift up and pull out the SIMM.

3. Holding one of the new 72-pin SIMMs by its edges, turn it so the keyed

(notched) side faces the center of socket SI 3 (refer to Figure 8).

4. Insert the SIMM into the socket at an angle of about 30 degrees from the

vertical.

Black poles on

socket must

line up with

holes in SIMM

Retainer

A320009A

1 2 ... 27 28 29 30 31 32 33 34 35 36

Žádné komentáře

Avaya FRE-2 Uživatelský manuál Strana 32