Avaya Configuring Data Encryption Services Uživatelský manuál Strana 52

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 62
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 51
Configuring Data Encryption Services
A-4 117386-A Rev. A
WEP Line Parameters
Parameter: Enable
Path: Configuration Manager > Protocols > WEP > Lines
Default: Enable
Options: Enable | Disable
Function: Enables or disables encryption on this line. Defaults to Enable only if you select
WEP in the Protocols menu.
Instructions: Accept the default, Enable, to use encryption on this line. Remember to enable
either the PPP or Frame Relay Encrypt Enable parameter also.
MIB Object ID: 1.3.6.1.4.1.18.3.4.28.1.1.2
Parameter: Cipher Mode Mask
Path: Configuration Manager > Protocols > WEP > Lines
Default: DES (40 bit keys)
Options: DES (40 bit keys) | DES (56 bit keys) | Both
Function: Determines whether this line uses 40-bit or 56-bit encryption.
Instructions: Accept the default, 40, unless you have the strong encryption option that
enables you to use 56-bit encryption. Select both values if you have 56-bit
encryption and don’t know the value on the other side of the link. If you select
both, the link uses 56-bit encryption if both sides support it; if not, it uses 40-bit
encryption.
The Site Manager screen displays the value of this parameter in hexadecimal
notation:
0x 10000000 = 56-bit encryption
0x 20000000 = 40-bit encryption
0x 30000000 = Both
MIB Object ID: 1.3.6.1.4.1.18.3.4.28.1.1.5
Zobrazit stránku 51
1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 61 62

Komentáře k této Příručce

Žádné komentáře