Avaya BCC Rychlý návod stáhnout pdf (Strana 2)

2 Part Number 308602-14.00 Rev 00

Figure 1. Hierarchy of BCC Objects

Sample Session

To create the sample configuration shown in Figure 1 on a BN router with an Ethernet link module

in slot 2, enter the following BCC commands. Notice how each BCC prompt contains the BCC

identifier of the object just configured.

Command Comment

box# ethernet slot 2 connector 1 Configures ethernet 2/1 using a fully specified

interface location.

ethernet/2/1# ip 11.23.13.14/8 Configures ip/11.23.13.14/255.0.0.0 using a

decimal mask value. The BCC automatically

configures the global ip object when you configure

the first ip interface on the box.

ip/11.23.13.14/255.0.0.0# rip Configures RIP on ip/11.23.13.14. No parameter

values are required.

rip/11.23.13.14# back Moves back one level closer to box or root level.

ip/11.23.13.14/255.0.0.0# back 2 Moves back two levels to box level.

box# eth 2/2 Configures ethernet 2/2 using abbreviated syntax.

(Slashes between required parameter values

only.)

ethernet/2/2# ip address 11.23.13.15

mask 255.0.0.0

Configures ip/11.23.13.15/255.0.0.0 using

dotted-decimal notation for the mask value.

ip/11.23.13.15/255.0.0.0# rip Configures RIP on ip/11.23.13.15/255.0.0.0.

rip/11.23.13.15# box Jumps to root level. You can use this command

from any location in the object hierarchy.

box

ethernet slot 2 connector 1

ethernet slot 2 connector 2

ip address 11.23.13.14 mask 255.0.0.0

rip

ip address 11.23.13.15 mask 255.0.0.0

rip

BCC0037A

1 2 3 4

Žádné komentáře

Avaya BCC Rychlý návod Strana 2