Avaya Cable Uživatelský manuál Strana 160

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 202
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 159
Cable Guide
7-2 114072-A Rev. C
If you need to order additional cables, contact the Bay Networks Technical
Response Center in your area. (See “How to Get Help” in the front matter.)
The following sections include
Illustrations for each cable with the Bay Networks connector on the left and
the remote connector on the right
Cable length information
If you want to build a cable, and you want to determine the maximum cable
length appropriate for each of your interconnection requirements, you should
-- Identify in this chapter a cable that satisfies your wiring requirement (with
the exception of total cable length)
-- Consult the networking industry specification, standard, or
recommendation designated in the “Industry Interface Type” entry for
that cable (located immediately following the cable pinout diagram)
Pinouts for each connector and all associated signals
Wire jumper identification for either connector (when applicable)
For example, the 15-pin D-sub to RS-422 cable (Order No. 7116) lists internal
wire connections (Pin 7
> 12; Pin 25 > 30) in the Remote Termination column.
This indicates that you must connect pin 7 to pin 12 and pin 25 to pin 30
inside the remote connector.
Grounding arrangements that isolate the chassis from the DC ground within
the cable
Zobrazit stránku 159
1 2 ... 155 156 157 158 159 160 161 162 163 164 165 ... 201 202

Komentáře k této Příručce

Žádné komentáře