Avaya IP Phones Uživatelský manuál stáhnout pdf (Strana 103)

Nortel Networks IP Phone 2004 Page 103 of 302

IP Phones Description, Installation, and Operation

Note: For all IP static assignments, your system administrator provides

the network information.

Full Duplex mode

In the Configuration menu, Auto Negotiate mode is the default setting for

initial startup. Typically, the telephone is connected to a network that

supports Auto Negotiate and it selects the best speed and duplex mode

available. There is no intervention required under normal operation.

If the telephone is connected to a network configured for Full Duplex mode

only, it is not able to automatically negotiate the proper configuration.

Therefore, in this instance, to allow the telephone to work at the optimum

speed and duplex mode, Auto Negotiate must be disabled. Use the following

procedure to disable Auto Negotiate and enable Full Duplex mode.

Table 13

IP Phone 2004 IP parameters

Parameter Method of Acquisition

IP Address Manually entered or automatically retrieved through

Partial or Full DHCP.

Net Mask Manually entered or automatically retrieved through

Partial or Full DHCP.

Router Address Manually entered or automatically retrieved through

Partial or Full DHCP.

Connect Server (IP address, port,

action and retry count — primary

and secondary)

Manually entered or automatically retrieved through Full

DHCP.

User ID (Node ID, Node Password

and TN)

Manually entered for first-time configuration. Retrieved

from local storage on subsequent power cycles.

Provided by your system administrator.

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 303 304

Žádné komentáře

Avaya IP Phones Uživatelský manuál Strana 103