Avaya Redundancy BCM Rls 6.0 Uživatelský manuál stáhnout pdf (Strana 29)

Redundancy

NN40011-048 Issue 1.2 BCM450 Rls 6.0 29

3. The secondary Hard Disk Drive is now installed. Replace the front Hard

Drive cover and tighten the retaining screw.

Enabling the RAID Service after Upgrade

Once you have re-seated the BCM 450 and reconnected any necessary

cables, power up the unit. You will notice that the front LED’s show the

following configuration:

This means that RAID is installed as a service, but is currently disabled. To

enable the service follow the steps below:

Note: Enabling the RAID service will initiate a BCM reboot.

1. In Element Manager, go to the Administration tab, then the System

Metrics folder, and click on Disk Mirroring.

1 2 ... 24 25 26 27 28 29 30 31 32 33

Žádné komentáře

Avaya Redundancy BCM Rls 6.0 Uživatelský manuál Strana 29