Avaya Configuring BOOTP Services Uživatelský manuál stáhnout pdf (Strana 114)

Configuring SNMP, BootP, and DHCP Services

4-16

308644-14.00 Rev 00

Specifying the Target Server’s Host Name

If you want to keep track of the names of BootP and DHCP servers, specify the

target server’s host name. The host name cannot exceed 63 ASCII characters,

including embedded spaces.

To specify the target server’s host name, complete the following tasks:

Disabling the Forwarding Route

By default, BootP and DHCP forwarding is enabled for the route that you

configured. You can disable BootP or DHCP forwarding on this route.

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

BOOTP

. The BOOTP menu opens.

4. Choose

Relay Agent Interface Table

. The BOOTP Relay Agent Interface Table

window opens.

5. Click on

Pref Serv

. The BOOTP Relay Agent Preferred

Server Table window opens.

6. Set the

Target Name

parameter.

Click on

Help

or see the parameter

description on page A-23.

7. Click on

Apply

8. Click on

Done

. You return to the BOOTP Relay Agent

Interface Table window.

9. Click on

Done

. You return to the Configuration Manager

window.

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 173 174

Komentáře k této Příručce

Žádné komentáře

Avaya Configuring BOOTP Services Uživatelský manuál Strana 114

Komentáře k této Příručce

Související produkty a manuály pro Sítě Avaya Configuring BOOTP Services