
Customizing BootP
308644-14.00 Rev 00
4-17
To disable the forwarding route, complete the following tasks:
Filtering BootP and DHCP Packets
You can control whether an interface transmits BootP packets, DHCP packets, or
both to a server by configuring filters for these specific packets. The default
setting is BootP and allows the interface to transmit only BootP packets. Change
the setting if you want to transmit DHCP messages.
To filter BootP and DHCP packets, complete the following tasks:
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
BOOTP
. The BOOTP menu opens.
4. Choose
Relay Agent Interface Table
. The BOOTP Relay Agent Interface Table
window opens.
5. Click on
Pref Serv
. The BOOTP Relay Agent Preferred
Server Table window opens.
6. Set the
Enable/Disable
parameter.
Click on
Help
or see the parameter
description on page A-23.
7. Click on
Apply
.
8. Click on
Done
. You return to the BOOTP Relay Agent
Interface Table window.
9. Click on
Done
. You return to the Configuration Manager
window.
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
(continued)
Komentáře k této Příručce