Avaya Configuring PPP Services Uživatelský manuál Strana 72

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 140
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 71
Configuring PPP Services
3-18 117360-A Rev. A
To disable LCP on this interface, set Enable (LCP) parameter to Disable. To
reenable LCP, set this parameter to Enable.
Setting Transmission Parameters
You can specify the timing of transmissions and the threshold for considering the
link to be down using the parameters described in the following sections.
Setting the Restart Timer
The value of the Restart Timer in Seconds parameter specifies the number of
seconds that the restart timer waits before retransmitting data. The default value is
3 seconds, and the range is 1 through 1000 seconds.
Using the BCC
Navigate to the line prompt for the circuit and enter
restart-timer
seconds
For example, the following command sets the restart timer to wait 5 seconds
before retransmitting data on circuit 3/1.
line/3/1# restart-timer 5
Using Site Manager
To set the restart timer on this interface, do the tasks in the following table.
4. Set Enable (LCP). (See page A-14.)
5. Click on OK. The Interfaces window opens.
Site Manager Procedure
You do this System responds
1. From the Protocols menu, choose PPP. The Interfaces menu appears.
2. Choose Interfaces. The Interfaces window opens.
Site Manager Procedure
(continued)
You do this System responds
Zobrazit stránku 71
1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 139 140

Komentáře k této Příručce

Žádné komentáře