Avaya Configuring PPP Services Uživatelský manuál Strana 137

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 152
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 136
Monitoring PPP Using the BCC show Command
308639-14.00 Rev 00
D-3
show ppp enabled
The
BCC
show ppp enabled
command
displays information about the protocols
enabled on the specified PPP circuit.
The output contains the following information:
show ppp interfaces
The
BCC
show ppp interfaces
command displays configuration information for
each type of interface configured on each circuit.
The output contains the following information:
Circuit The circuit for which this command displays information.
Line # The line within the circuit to which this information applies.
Protocol The protocol enabled on this line.
State The operational state of this line.
Circuit The circuit for which this command displays information.
Slot/<Module>/Conn The name of the physical interface.
Driver State The operational state of the driver, if one is present.
Protocol The protocol or protocols configured on this circuit.
State The operational state of each configured protocol.
Line State The operational state of each line in the circuit.
Zobrazit stránku 136
1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 151 152

Komentáře k této Příručce

Žádné komentáře