Avaya Configuring WAN Line Services Uživatelský manuál stáhnout pdf (Strana 251)

Site Manager WAN Line Services Parameters

117345-B Rev. 00

A-43

FT1 Port Application and Clock Parameters

Parameter: Port Application Mode

Path: Unconfigured FT1 Connector > Port Application

Default: NONPRI

Options: NONPRI

Function: Specifies the port application to use on the logical lines.

Instructions: Select NONPRI to indicate that all of the lines have a permanent circuit number

and are for leased lines, frame relay, or permanent connections to other

non-ISDN PRI applications.

MIB Object ID: 1.3.6.1.4.1.18.3.4.9.1.16

Parameter: Primary Clock

Path: FT1 CLOCK Connector > Edit Slot > DS1/E1 Clock Parameters

Default: Port 1 Ext Loop

Options: Internal

Port 1 Ext Loop

Function: Identifies the primary source of the timing signals.

Instructions: Select Internal to use the clock chip on the link or net module.

Select Port 1 Ext Loop to use the signal coming from port 1.

MIB Object ID: 1.3.6.1.4.1.18.3.4.9.1.1.4

Parameter: Secondary Clock

Path: FT1 CLOCK Connector > Edit Slot > DS1/E1 Clock Parameters

Default: Internal

Options: Internal

Port 1 Ext Loop

Function: Identifies the secondary source of the timing signals. The router uses the

secondary clock only when the primary clock is unavailable.

Instructions: Select Internal to use the clock chip on the link or net module.

Select Port 1 Ext Loop to use the signal coming from port 1.

MIB Object ID: 1.3.6.1.4.1.18.3.4.9.1.1.5

1 2 ... 246 247 248 249 250 251 252 253 254 255 256 ... 293 294

Žádné komentáře

Avaya Configuring WAN Line Services Uživatelský manuál Strana 251