Avaya System Memory in a BayStack ARN Router Uživatelský manuál stáhnout pdf (Strana 29)

Installing the Memory Module

114314 Rev. A 1-7

Figure 1-8. Inserting the SIMM

Tilt the SIMM down into its locked position (Figure 1-9).

You should hear a “click” as the spring latches engage the ends of the SIMM.

Figure 1-9. SIMM in Locked Position

If the SIMM does not lock into place:

a. Remove the SIMM (refer to the previous section, “Removing an

Installed Memory Module”).

b. Check the orientation of the guide notch (refer to Figure 1-7).

c. Reinsert the SIMM, wiggling it gently as you press it into the socket.

d. Try again to tilt it into its locked position.

Caution: It is normal to feel a slight resistance as the SIMM comes to its

locked position, but be careful not to use too much force. It is easy to damage

the SIMM socket by forcing it into the locked position.

ARN0022A

Guide

notch

ARN0023A

1 2 ... 24 25 26 27 28 29 30 31 32

Žádné komentáře

Avaya System Memory in a BayStack ARN Router Uživatelský manuál Strana 29