Avaya Configuring ATM Services Uživatelský manuál stáhnout pdf (Strana 105)

Customizing an ATM Interface

117374-B Rev. 00

3-7

Defining the SVC Inactivity Timeout

When you enable the SVC inactivity timeout function (the default), the router

automatically terminates any SVCs that have not received or transmitted any

cells. If you disable the SVC inactivity timeout function, all SVCs on the line

remain open until you close them by another method.

When enabled, the SVC inactivity timeout function also requires a timer value.

This timer value specifies how long you want the ATM router to wait before

disabling inactive SVCs. By default, if the router does not receive or transmit any

cells for 1200 seconds, the inactive SVCs are disabled. However, you can set this

timer to any value from 60 to 3600 seconds.

Using the BCC

To disable the SVC inactivity timeout function, navigate to the atm prompt (for

example,

box; atm/11/1

) and enter:

vc-inactivity-control disabled

For example, the following command disables the SVC inactivity timeout

function on the ATM interface:

atm/11/1# vc-inactivity-control disabled

atm/11/1#

To reenable the SVC inactivity timeout function, navigate to the atm prompt and

enter:

vc-inactivity-control enabled

To change the SVC inactivity timeout value, navigate to the atm prompt and enter:

vc-inactivity-timeout

integer

integer is the amount of time (in seconds) that the router can wait before it

disables inactive SVCs.

For example, the following command sequence reenables the SVC inactivity

timeout function on the ATM interface and sets the SVC inactivity timeout value

to 2400 seconds:

atm/11/1# vc-inactivity-control enabled

atm/11/1# vc-inactivity-timeout 2400

atm/11/1#

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 410 411

Žádné komentáře

Avaya Configuring ATM Services Uživatelský manuál Strana 105