
Site Manager Parameters
117355-A Rev. A A-7
DVMRP Circuit Parameters
Parameter: Enable
Path: Configuration Manager > Protocols > IP > Multicast > DVMRP > Circuit
Default: Enable
Options: Enable
| Disable
Function: Enables or disables DVMRP on this circuit.
Instructions: If you have configured DVMRP on this circuit, enter Disable to disable it.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.12.2.1.2
Parameter: Route Enable
Path: Configuration Manager > Protocols > IP > Multicast > DVMRP > Circuit
Default: Enable
Options: Enable
| Disable
Function: Enables or disables this circuit for routing.
Instructions: Specify Enable if you want this circuit to be used to propagate routing
information, and if you want information about the source network associated
with this circuit incorporated into routing updates. Specify Enable if you want
multicast datagrams to be forwarded on this circuit in “native mode” -- that is,
as multicast datagrams. You can configure tunnels on this circuit.
Specify Disable if you want this circuit to exist only to support unicast tunnels.
If you specify Disable, all other DVMRP circuit parameters are ignored. The
source network associated with this circuit is not incorporated into the routing
updates.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.12.2.1.5
Komentáře k této Příručce