
Customizing SNMP
117362-A Rev. A 3-15
Specifying the Trap Port
By default, the standard port number on the managing station to which the SNMP
agent transmits traps is 162. To use a different UDP port number, specify a value
from 1 to 9999. Do not specify a port that another application uses.
Using the BCC
To specify the port number on the managing station on which the SNMP agent
transmits traps, navigate to the manager-specific prompt and enter:
trap-port
integer
integer
is a number from 1 to 9999.
For example, the following command line causes the SNMP agent to transmit
traps to manager 2.2.2.2 on port number 150.
manager/router1/2.2.2.2# trap-port 150
manager/router1/2.2.2.2#
Using Site Manager
To specify the port number on the managing station on which the SNMP agent
transmits traps, complete the tasks in the following table.
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose Protocols.
The Protocols menu opens.
2. Choose IP. The IP menu opens.
3. Choose SNMP. The SNMP menu opens.
4. Choose Communities. The SNMP Community List window
opens.
5. Choose Community. The Community menu opens.
6. Choose Managers. The SNMP Manager List window for that
community opens.
7. Select the manager you want to edit.
8. Choose Manager. The Manager menu opens.
(continued)
Komentáře k této Příručce