Avaya Configuring Traffic Filters and Protocol Prioritization Uživatelský manuál Strana 38

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 162
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 37
Configuring Traffic Filters and Protocol Prioritization
2-4
If there is no traffic in the normal-priority queue, the algorithm proceeds to
Step 5.
4. The router empties all packets from the normal-priority queue, up to the
bandwidth percentage you have configured, into the transmit queue and
transmits them.
The default bandwidth percentage for the normal-priority queue is 20 percent.
If the actual bandwidth use is less than the limit, the router empties the
normal-priority queue and proceeds to the next queue.
5. The transmit queue scans the low-priority queue.
If there is no traffic in the low-priority queue, the algorithm starts again at
Step 1.
6. The router empties all packets from the low-priority queue, up to the
bandwidth percentage you have configured, into the transmit queue and
transmits them.
The default bandwidth percentage for the low-priority queue is 10 percent.
If the actual bandwidth use is less than the limit, the router empties the
low-priority queue.
7. The algorithm starts again at Step 1.
Figure 2-2 illustrates the algorithm for bandwidth allocation dequeuing.
Zobrazit stránku 37
1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 161 162

Komentáře k této Příručce

Žádné komentáře