Avaya Configuring Traffic Filters and Protocol Prioritization Uživatelský manuál Strana 65

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 162
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 64
Inbound Traffic Filter Criteria and Actions
3-7
IP Criteria and Actions
You filter inbound IP traffic based on specified bit patterns contained within the IP
header or the header of the upper-level protocol (TCP or UDP, for example)
conveyed within the IP datagram.
Predefined IP Criteria
Table 3-2 lists the predefined filtering fields for IP filters and the reference field,
offset, and length value for each criterion.
User-Defined IP Criteria
In addition to the predefined filter criteria, you can create IP traffic filters with
user-defined criteria by specifying an offset and length to these reference fields in
the IP header:
Note: The circuit names you enter in the Forward to Circuit list are
case-sensitive. For example, if the circuit name is E21, but you enter it as
e21,
the filter will not be saved.
Table 3-4. Predefined Criteria for IP Inbound Traffic Filters
Criterion Name Reference Field Offset Length
Type of Service HEADER_START 8 8
Protocol HEADER_START 72 8
IP Source Address HEADER_START 96 32
IP Destination Address HEADER_START 128 32
UDP/TCP Source Port HEADER_END 0 16
UDP/TCP Destination Port HEADER_END 16 16
Reference Field Description
HEADER_START Points to the first byte of the Type of Service
HEADER_END Points to the last byte of the IP Destination Address
Zobrazit stránku 64
1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 161 162

Komentáře k této Příručce

Žádné komentáře