Avaya Configuring Dial Services Uživatelský manuál Strana 244

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 428
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 243
Configuring Dial Services
11-8 114062 Rev. B
Figure 11-4. Preferred/Reserved Slots for BOD Pool Window
4.
Enter a new value for each slot parameter.
Be sure to read the parameter descriptions because it is important to set these
parameters correctly.
The slot parameters that you specify affect all circuits in the pool. Also, Site
Manager applies these values to the same parameter in the Bandwidth On Demand
Monitor Options window (refer to Figure
11-2).
If you change the lines in a bandwidth pool, and the Bandwidth Mode parameter
for these lines is set to Monitor, Site Manager prompts you to enter new values for
the Preferred and Reserved Bandwidth Slot parameters.
Setting the Preferred and Reserved Slots For BAP
If you configure BAP for dial-up circuits, the Bandwidth Mode parameter must be
set to Dynamic Monitor. This enables the router to act as the monitor or
non-monitor router. You must then configure the Preferred and Reserved
Bandwidth Slot parameters so that the non-monitor router knows which slots to
check first for available lines. The non-monitor router then sends the monitor
router the phone number that it dials to activate the additional line.
Site Manager: Preferred Bandwidth Slot parameter: page A-80
Site Manager: Reserved Bandwidth Slot parameter: page A-81
Zobrazit stránku 243
1 2 ... 239 240 241 242 243 244 245 246 247 248 249 ... 427 428

Komentáře k této Příručce

Žádné komentáře