Avaya BCM50 Průvodce řešením problémů Strana 29
- Strana / 92
- Tabulka s obsahem
- ŘEŠENÍ PROBLÉMŮ
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
Chapter 3 Hardware Troubleshooting 29
BCM50 Troubleshooting Guide
To test the expansion unit
Use the following test to ensure the expansion unit is operating properly:
1 Make sure that the BCM50 system is fully booted.
2 Check the power and status LEDs on the MBM that is inserted in the expansion unit. Both
LEDs must be solid green. If either LED is not solid green, a problem exists with the MBM or
the expansion unit.
3 If the expansion unit has an MBM that supports extensions, go to an extension that is
connected to the MBM.
4 Check for a dial tone.
5 Use this extension to make a call to another extension on the system.
6 If the expansion unit has an MBM that supports lines, go to an extension that has access to one
of the lines on the MBM.
7 Select the line or line pool to which the line belongs.
8 Check for a dial tone.
9 Make a call using the line or line pool.
To troubleshoot the expansion unit
1 Check that the correct feature for the expansion unit is included in your installed keycode.
2 Check that the expansion port is connected to the proper connector.
3 Check the wiring to the MBM. Make sure that the cables are properly seated and are connected
to the correct ports with proper LED indications.
4 Check that the switches on the MBM are all set to on.
If the MBM is a GASM or GATM, all the switches on the right are not on.
To check the MBM switches, you must remove the MBM from the expansion unit. For imore
information, see the BCM50 Installation and Maintenance Guide.
5 Perform a firmware download to ensure that the correct version is loaded on the ASM/GASM
or GATM unit.
6 Use Element Manager or Telset Admin to check the programming for the lines or extensions
connected to the MBM.
7 Reboot the system to ensure that the BCM50 main unit functions correctly.
8 If the programming is incorrect, use the Backup and Restore Utility to load a recent backup of
system programming. If a recent backup is not available, correct the programming using
Element Manager or the Telephone Administration feature.
- BCM50 Troubleshooting Guide 1
- Trademarks 2
- Task List 3
- Contents 5
- Chapter 10 7
- Chapter 11 7
- 8 Contents 8
- Chapter 1 9
- Acronyms 10
- Chapter 1 Introduction 11 11
- Table 1 List of acronyms 11
- 12 Chapter 1 Introduction 12
- NN40020-700NN40020-700 12
- Related publications 13
- 14 Chapter 1 Introduction 14
- Chapter 2 15
- Logical connections 16
- Chapter 3 17
- System status LEDs 18
- LAN port LEDs 19
- Figure 6 MBM LEDs 23
- DTM LEDs 24
- Check the wiring connections 25
- Verify the keycodes 25
- Restart the system 26
- To restart the system 27
- To test the main unit 28
- To troubleshoot the main unit 28
- To test the expansion unit 29
- To test the MBM 30
- To test a station MBM 30
- To test a trunk MBM 30
- To check the ATA2 wiring 31
- Reset to factory settings 31
- Reset levels 32
- Activate the reset feature 32
- Table 10 Level 1 reset 35
- Table 11 Level 2 reset 35
- Chapter 4 37
- Check line programming 38
- To check line programming 38
- Trunk/Line data 38
- Properties 40
- Preferences 42
- Restrictions 45
- Restoring system data 46
- Verify the software inventory 48
- Chapter 5 51
- Troubleshooting example 2 55
- Troubleshooting example 3 60
- Troubleshooting example 4 62
- Troubleshooting example 5 63
- Troubleshooting example 6 68
- Chapter 6 69
- Chapter 7 73
- Utilities 74
- Chapter 8 75
- Table 18 Release reasons 76
- Chapter 9 77
- Password protection 81
- Fault management 82
- System and status information 83
- Figure 13 Save dialog box 85
- Viewing the system health 86
Související produkty a manuály pro Sítě Avaya BCM50
Sítě Avaya DHCP BCM Rls 6.0 Uživatelský manuál
(26 stránky)
(26 stránky)
Sítě Avaya E1/FE1 Uživatelský manuál
(42 stránky)
(42 stránky)
Sítě Avaya v8.0 Uživatelský manuál
(23 stránky)
(23 stránky)
Sítě Avaya Configuring Line Services Uživatelský manuál
(268 stránky)
(268 stránky)
Sítě Avaya E1 Uživatelský manuál
(52 stránky)
(52 stránky)
Sítě Avaya BCM Imaging Tool Uživatelská příručka
(40 stránky)
(40 stránky)
Sítě Avaya an Expansion Module in a BayStack ARN Router (114202 Rev. A) Uživatelský manuál
(40 stránky)
(40 stránky)
Sítě Avaya BayRS Version 15.7.0.0 Oznámení
(80 stránky)
(80 stránky)
Sítě Avaya SIP DECT Fundamentals Uživatelský manuál
(292 stránky)
(292 stránky)
Sítě Avaya BCM450 Uživatelský manuál
(92 stránky)
(92 stránky)
MTD VB20 series manuály
Uživatelské manuály a uživatelské příručky pro Sekačky na trávu MTD VB20 series.
Poskytujeme 1 manuály pdf MTD VB20 series ke stažení zdarma podle typů dokumentů: Návod k obsluze
Komentáře k této Příručce