Avaya BCM50 Průvodce řešením problémů stáhnout pdf (Strana 33)

Chapter 3 Hardware Troubleshooting 33

BCM50 Troubleshooting Guide

As you press the reset switch, the LEDs blink in a predefined fashion to guide and confirm user

input. The various states of the power and status LEDs indicate the following:

• A blinking power LED indicates a user input window; the BCM50 system is waiting for user

input.

• A solid red power LED indicates extreme action is requested; caution is urged.

• A solid status LED (any color) indicates level of reset action:

— Level 1 is yellow

—Level 2 is red

• A blinking status LED indicates an interim state; trying to establish user request.

• A solid status LED indicates confirmation of a user selection (power LED has priority).

To perform a Level 1 and Level 2 reset

The router configuration of a BCM50a or BCM50e is not affected by a Level 1 reset. To perform a

soft reset on the router, use Element Manager.

See the figure Level 1 and Level 2 reset sequence on page 34, or follow the sequence in the table

Level 1 reset on page 35 and the table Level 2 reset on page 35 to perform a Level 1 and Level 2

reset. All times shown in the figure are approximate; it is important that you wait for the system to

complete the reset before taking any further action.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 91 92

Žádné komentáře

Avaya BCM50 Průvodce řešením problémů Strana 33