Avaya Configuring APPN Services Uživatelský manuál stáhnout pdf (Strana 56)

Configuring APPN Services

2-16

308963-14.00 Rev 00

Parameter: Sync Line Coding

Default: NRZ

Options: NRZ

NRZI

NRZI Mark

Function: Sets the same line coding value for all devices attached to the same SDLC

link. You can change the value of this parameter to match the line coding

of a device at the other end of the line.

This parameter is relevant only for the AN and ASN routers, and the Octal

Sync module. Other Nortel Networks router platforms use NRZ encoding.

NRZ -- Indicates Non-Return to Zero encoding.

NRZI -- Indicates Non-Return to Zero Inverted encoding.

NRZI Mark -- Indicates Non-Return to Zero Inverted Mark encoding.

Instructions: Select NRZ or NRZI. NRZI Mark is not generally used for SDLC.

MIB Object ID: 1.3.6.1.4.1.18.3.4.5.1.88

Parameter: Cable Type

Default: RS232

Options: Null

RS232

RS422

V35

X21

Function: Specifies the cable interface to the network.

Instructions: Click on Values and select the installed cable interface type.

MIB Object ID: 1.3.6.1.4.1.18.3.4.5.1.83

Parameter: RTS Enable

Default: Disable

Options: Enable

Disable

Function: Controls the toggling of the Request to Send (RTS) signal on the

interface.

Instructions: Click on Values and select Enabled or Disabled. For manual dial modems

(2-wire), set this parameter to Enabled. For leased modems (4-wire), set

this parameter to Disabled.

MIB Object ID: 1.3.6.1.4.1.18.3.4.5.1.16

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 149 150

Žádné komentáře

Avaya Configuring APPN Services Uživatelský manuál Strana 56