Avaya Configuring IP, ARP, RIP, and OSPF Services Uživatelský manuál Strana 205

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 374
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 204
Customizing OSPF Services
308627-14.00 Rev 00
6-27
Setting the Hello Interval
The Hello interval specifies how often the router sends Hello messages on the
interface. By default, OSPF transmits a Hello message every 10 seconds.
Each type of network has an optimum Hello interval. If the interface is connected
to a broadcast network, you should use the default setting -- 10 seconds. Table 6-4
lists the suggested settings for network types supported by OSPF.
Table 6-4. Hello Interval Settings
Network Type Suggested Hello Interval (seconds)
Broadcast 10 (default)
Point-to-point 15
NBMA 20
Point-to-multipoint 15
Note:
This value must be the same for all routers attached to the same
network.
Zobrazit stránku 204
1 2 ... 200 201 202 203 204 205 206 207 208 209 210 ... 373 374

Komentáře k této Příručce

Žádné komentáře