Avaya Configuring IP, ARP, RIP, and OSPF Services Uživatelský manuál Strana 295

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 374
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 294
Site Manager Parameters
308627-14.00 Rev 00
A-45
Parameter: Retransmit Interval
Path: Configuration Manager > Protocols > IP > OSPF/MOSPF > Interfaces
Default: 5 seconds
Options: 1 to 3600 seconds
Function: Indicates the number of seconds between link state advertisement
retransmissions for adjacencies belonging to this interface. This value is also
used when retransmitting OSPF packets. Nortel Networks suggests the
following values for this parameter: for broadcast, 5 seconds; for point-to-point,
NBMA, and point-to-multipoint, 10 seconds.
Instructions: Either accept the default value of 5 seconds or set the retransmit interval to a
slightly higher number for slower-speed serial lines.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.3.5.1.10
Parameter: Hello Interval
Path: Configuration Manager > Protocols > IP > OSPF/MOSPF > Interfaces
Default: 10 seconds
Options: 1 to 65,535 seconds
Function: Indicates the number of seconds between the Hello packets that the router
sends on the interface. Nortel Networks suggests the following values for this
parameter: for broadcast, 10 seconds; for point-to-point, 15 seconds; for
NBMA, 20 seconds; for point-to-multipoint, 15 seconds.
Instructions: Either accept the default value of 10 seconds or set the Hello interval to a
higher number for slower-speed serial lines. This value must be the same for
all routers attached to the same network.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.3.5.1.11
Zobrazit stránku 294
1 2 ... 290 291 292 293 294 295 296 297 298 299 300 ... 373 374

Komentáře k této Příručce

Žádné komentáře