Avaya Configuring IP, ARP, RIP, and OSPF Services Uživatelský manuál Strana 256
- Strana / 374
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
Configuring IP, ARP, RARP, RIP, and OSPF Services
A-6
308627-14.00 Rev 00
Parameter: MTU Discovery
Path: Configuration Manager > Protocols > IP > Interfaces
Default: Disabled
Options: Enabled
|
Disabled
Function: Specifies whether path MTU (maximum transmission unit) discovery
(RFC 1191) is enabled on this interface. When this option is enabled the Do Not
Fragment (DF) bit in the IP header is set for all datagrams going out the
interface. If any of the datagrams are too large to be forwarded without
fragmentation by some router along the path, that router will discard them and
return an ICMP destination unreachable message with a code indicating that
fragmentation is required and that the DF bit is set. The MTU of the
non-conforming hop is also provided. Upon receipt of this message the source
host reduces its path MTU for the path. This parameter essentially guarantees
that the host will not receive any fragments from a peer doing path MTU
discovery.
Instructions: Select Enabled to enable path MTU discovery on this interface; select Disabled
to disable the option on this interface.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.24.1.12
Parameter: ASB
Path: Configuration Manager > Protocols > IP > Interfaces
Default: Disabled
Options: Enabled
|
Disabled
Function: Specifies whether the IP router floods all-subnet broadcast (ASB) datagrams it
receives out this interface. An ASB datagram has a destination address equal to
the broadcast address for an entire network (all subnets). For example, if a
network interface serves the subnet 128.10.2.1 with a subnet mask of
255.255.255.0, the IP router considers any datagram with a destination address
of 128.10.255.255 or 128.10.0.0 to be an ASB datagram.
Instructions: Specify Enabled if you want the IP router to flood ASBs out this interface;
specify Disabled to prevent the router from flooding ASBs out this interface.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.24.1.14
- Configuring IP, ARP, RARP 1
- RIP, and OSPF Services 1
- Trademarks 2
- Restricted Rights Legend 2
- Statement of Conditions 2
- Contents 5
- 308627-14.00 Rev 00 10
- Before You Begin 17
- Text Conventions 18
- Acronyms 19
- Related Publications 21
- How to Get Help 22
- Chapter 1 23
- IP Addresses 24
- Subnet Addressing 26
- Supernet Addressing 29
- Autonomous Systems 30
- Figure 1-4. ARP Example 32
- OSPF Neighbors 36
- Neighbor Adjacencies 36
- Designated Routers 37
- OSPF Areas 38
- OSPF Router Types 40
- AS External Routes 40
- OSPF Implementation Notes 41
- Router Discovery Protocol 42
- Route Preferences 42
- Route Weights 43
- Figure 1-7. IP Routing Table 45
- IP Traffic Filters 48
- Chapter 2 49
- Starting IP Services 49
- Starting RIP 51
- Starting OSPF 52
- Starting Router Discovery 52
- Adding RIP to an IP Interface 55
- Starting RARP 57
- Chapter 3 63
- Caution: 80
- Customizing an IP Interface 82
- IP0012A 97
- Configuring an SMDS Address 100
- (continued) 101
- Using the BCC 103
- Using Site Manager 104
- Deleting IP from an Interface 107
- Defining a Static Route 111
- 3.2.4.5/255.255.0.0: 113
- Choosing a Broadcast Type 118
- Chapter 4 123
- Customizing ARP 124
- Customizing Global ARP 125
- (continued) 129
- Figure 4-1. Proxy ARP Example 130
- Customizing RARP 134
- Deleting RARP Globally 137
- Chapter 5 139
- Customizing RIP Services 139
- Setting the RIP Diameter 140
- Customizing a RIP Interface 141
- Selecting the RIP Version 142
- Specifying the Update Mode 147
- Sending Triggered Updates 149
- Listening for a Default Route 155
- Defining a RIP Accept Policy 163
- Chapter 6 179
- Customizing OSPF Services 179
- Supplying an OSPF Router ID 182
- Figure 6-1. OSPF ASE Routes 187
- Setting the Holddown Timer 192
- Configuring Message Logging 193
- Configuring an Area ID 198
- Specifying the Interface Type 199
- Estimating the Transit Delay 202
- Setting the Hello Interval 205
- Setting the Dead Interval 207
- Specifying the Metric Cost 209
- Table 6-6. Cost Settings 210
- Specifying the MTU Size 212
- Defining an Area 218
- Configuring Authentication 221
- Configuring a Summary Route 222
- Configuring a Stub Area 224
- 0.0.0.1: 229
- Policies 247
- Appendix A 251
- Site Manager Parameters 251
- IP Parameters 252
- IP Interface Parameters 254
- IP Global Parameters 269
- Static Route Parameters 276
- Adjacent Host Parameters 280
- Router Discovery Parameters 283
- RARP Parameters 285
- OSPF Parameters 287
- OSPF Interface Parameters 292
- OSPF Area Parameters 301
- Area Range Parameters 305
- OSPF NSSA Range Parameters 308
- RIP Parameters 314
- Appendix B 321
- Routing Policy Parameters 321
- RIP Accept Policy Parameters 325
- OSPF Accept Policy Parameters 326
- Appendix C 343
- RIP Export Filters 347
- OSPF Import Filters 350
- OSPF Export Filters 351
- Appendix D 355
- Route Weight Worksheet 355
- Appendix E 359
- IP/OSPF Configuration Example 359
- 10.1.1.0 360
- 255.255.255.0 (RIP Only) 360
Související produkty a manuály pro Sítě Avaya Configuring IP, ARP, RIP, and OSPF Services
Sítě Avaya BCM450 Uživatelský manuál
(22 stránky)
(22 stránky)
Sítě Avaya BSGX4e Uživatelská příručka
(206 stránky)
(206 stránky)
Sítě Avaya Event Messages for Routers Uživatelský manuál
(838 stránky)
(838 stránky)
Sítě Avaya a WAN Adapter Module in a BayStack ARN Router (114204 Rev. A) Uživatelský manuál
(34 stránky)
(34 stránky)
Sítě Avaya Configuring IPX Services Uživatelský manuál
(254 stránky)
(254 stránky)
Sítě Avaya Integrated Management Release 2.2 Network Management Console Uživatelská příručka
(154 stránky)
(154 stránky)
Sítě Avaya VLANs BCM Rls 6.0 Uživatelský manuál
(22 stránky)
(22 stránky)
Sítě Avaya 1100-Series Uživatelský manuál
(48 stránky)
(48 stránky)
Sítě Avaya BCM50 2.0 Uživatelská příručka
(26 stránky)
(26 stránky)
Sítě Avaya 0604DAX Oznámení
(20 stránky)
(20 stránky)
Sítě Avaya 2050 IP Softphone Uživatelský manuál
(26 stránky)
(26 stránky)
Sítě Avaya R5.0: Průvodce konfigurací
(20 stránky)
(20 stránky)
© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.040 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce