Avaya Configuring IP Multicasting and Multimedia Services Uživatelský manuál Strana 291

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 380
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 290
Site Manager Parameters
117355-D Rev 00
A-13
Parameter: Threshold
Path: Configuration Manager > Protocols > IP > DVMRP > Tunnel
Default: 1
Options: 1 to 254
Function: Specifies in hops a TTL value for the tunnel. This value is the minimum IP
TTL required for a multicast datagram to be forwarded out this tunnel.
Instructions: Use this parameter to control the scope of the datagrams. If the IP TTL is less
than the threshold value you specify, the router drops the datagram.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.12.3.1.8
Parameter: Forward Cache Size
Path: Configuration Manager > Protocols > IP > DVMRP > Tunnel
Default: 32
Options: 32 to 512
Function: Specifies the maximum number of entries allowed in the forwarding table
associated with this tunnel interface.
Instructions: When configuring a cache size, you must also keep in mind the TTL value for
entries. If you specify a large cache size, a larger TTL value is recommended.
For a smaller cache, a shorter TTL for cache entries is recommended.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.12.3.1.16
Parameter: Forward Cache TTL (Secs)
Path: Configuration Manager > Protocols > IP > DVMRP > Tunnel
Default: 7200
Options: 300 to 86,400 (seconds)
Function: Specifies in seconds the TTL for an entry in the forwarding table.
Instructions: Select an appropriate value for your configuration, from 300 seconds
(5 minutes) through 86,400 seconds (24 hours).
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.12.3.1.17
Zobrazit stránku 290
1 2 ... 286 287 288 289 290 291 292 293 294 295 296 ... 379 380

Komentáře k této Příručce

Žádné komentáře