Avaya Configuring Line Services Uživatelský manuál Strana 208

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 301
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 207
Site Manager Line Services Parameters
114078 Rev. A A-21
Parameter: SVC Inactivity Timeout Enable
Path: ATM Connector > Line Attributes > ATM ARE Line Driver Attributes
Default: Enable
Options: Enable
| Disable
Function: If you select Enable, the router disables any SVC on which the router receives
or transmits no cells for the number of seconds you specify using the SVC
Inactivity Timeout (Secs) parameter.
If you select Disable, the router keeps SVCs open unless you close them by
another method.
Instructions: Select Enable or Disable.
MIB Object ID: 1.3.6.1.4.1.18.3.4.23.3.2.1.13
Parameter: SVC Inactivity Timeout (Secs)
Path: ATM Connector > Line Attributes > ATM ARE Line Driver Attributes
Default: 1200 seconds
Options: 60 to 3600 seconds
Function: If the router receives or transmits no cells on an SVC for this number of
seconds, it closes the SVC, providing that you set the SVC Inactivity Timeout
Enable parameter to Enable.
Instructions: Enter an appropriate time, and be sure to set the SVC Inactivity Timeout Enable
parameter to Enable.
MIB Object ID: 1.3.6.1.4.1.18.3.4.23.3.2.1.14
Parameter: Framing Mode
Path: ATM Connector > Line Attributes > ATM ARE Line Driver Attributes
Default: Depends on ATM link module.
Options: SDH
| SONET | CBIT | M23 | G751 | G832
Function: Specifies the transceiver mode for the physical interface.
Instructions: Select a transceiver mode as follows:
SDH or SONET for OC-3 modules
CBIT or M23 for DS3 modules
G751 or G832 for E3 modules
MIB Object ID: 1.3.6.1.4.1.18.3.4.23.3.2.1.17
Zobrazit stránku 207
1 2 ... 203 204 205 206 207 208 209 210 211 212 213 ... 300 301

Komentáře k této Příručce

Žádné komentáře