
Configuring MPLS Services
A-14
305754-A Rev 00
Parameter: Rcv Burst Size
Path: Configuration Manager > Circuits > Edit Circuits > Edit > MPLS > LDP >
Default VC
Default: 40
Options: 1 to 65535
Function: Specifies the maximum number of sequential cells that the default VC can
receive at the peak cell rate before the VC must relinquish bandwidth to other
VCs.
When you set the MBS, you should select a value larger than the largest packet
that your default VC can transmit (that is, the Maximum AAL CPCS Transmit
SDU size). For example, if your VC accepts packets that are less than 4,608
bytes long, set your MBS value from 45 to 50 cells.
Instructions: Set a value in the specified range.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.16.1.3.1.16
Parameter: Rcv QOS Class
Path: Configuration Manager > Circuits > Edit Circuits > Edit > MPLS > LDP >
Default VC
Default: CLASS3
Options: CLASS0
|
CLASS1
|
CLASS2
|
CLASS3
Function: This parameter is a placeholder for future releases; it does not currently perform
any function on the router.
Instructions: Accept the default, CLASS3, for this parameter.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.16.1.3.1.17
Komentáře k této Příručce