Avaya Configuring IP Utilities Uživatelský manuál Strana 35

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 198
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 34
Starting TCP, FTP, TFTP, Telnet, NTP, and NetBIOS over IP
117358-A Rev. A 1-13
Starting TFTP Services
You can use the BCC command line interface or the Site Manager graphical user
interface to configure TFTP on the router, using default values for all parameters.
Before you begin, verify that you have configured IP on an interface, as described
in “Confi
guring IP for Global Protocols,” on page 1-6.
Using the BCC
To start TFTP on the router with default settings, begin in configuration mode at
the box-level prompt:
1. Configure TFTP.
box# tftp
tftp#
2. Display TFTP default settings.
tftp# info
on box
state enabled
default-volume 2
retry-timeout 5
close-timeout 25
retry-count 5
Using Site Manager
You can easily start TFTP services using all default parameter values. If you
decide to change some or all of the defaults, refer to the instructions in Chapter 5,
For a list of TFTP parameters, see Appendix B.
Before you begin, verify that you have configured IP on an interface, as described
in “Confi
guring IP for Global Protocols,” on page 1-6.
Zobrazit stránku 34
1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 197 198

Komentáře k této Příručce

Žádné komentáře