Avaya Configuring IP Utilities Uživatelský manuál Strana 43

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 198
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 42
Starting TCP, FTP, TFTP, Telnet, NTP, and NetBIOS over IP
117358-A Rev. A 1-21
To start NTP services, perform the following actions:
Disabling and Reenabling NTP Services
After you configure IP and start NTP on the router, all NTP default parameters are
automatically enabled on the router.
Using the BCC
To disable NTP services, navigate to the NTP prompt and enter:
disable
For example, the following command line disables NTP on the router.
ntp# disable
ntp#
To reenable NTP services, navigate to the NTP prompt and enter:
enable
For example, the following command line reenables NTP on the router.
ntp# enable
ntp#
Site Manager Procedure
You do this System responds
1. From the Configuration Manager window,
choose Protocols.
The Protocols menu opens.
2. Choose Global Protocols. The Global Protocols menu opens.
3. Choose NTP. The NTP menu opens.
4. Choose Create NTP. Site Manager creates NTP on the router.
Zobrazit stránku 42
1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 197 198

Komentáře k této Příručce

Žádné komentáře