Avaya ATM Link Modules and Routing Engines in BN Platforms Uživatelský manuál stáhnout pdf (Strana 21)

Installing ATM Link Modules

114951-B Rev 00

1-3

Figure 1-3. Link Module Slots in a BCN Platform

Removing a Link Module

If there are no empty slots in your BN platform, you must remove a link module to

install the ATM link module. When replacing a configured link module, you must

delete all configured circuits (ports) on the slot so the BN platform software can

properly configure the new link module.

Refer to Configuring Routers if you use router software or Administration Guide

if you use BayStream software for instructions on editing a configuration file and

deleting circuits.

The BN hot-swap feature allows you to remove or replace a link module with the

chassis power on or off.

Danger:

Do not remove more than two adjacent modules with the power on.

wer OK

Power

Power OK

Link module slots

SRML

QMC0012A

654321

14 13 12 11 10 9 8

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 45 46

Žádné komentáře

Avaya ATM Link Modules and Routing Engines in BN Platforms Uživatelský manuál Strana 21