Avaya Configuring BayStack Remote Access Uživatelský manuál stáhnout pdf (Strana 68)

Configuring BayStack Remote Access

3-14

308614-14.00 Rev 00

You can use Site Manager to create the BootP client interface table.

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

BOOTP

. The BOOTP menu opens.

4. Choose

Relay Agent Interface Table

. The BOOTP Relay Agent Interface Table

window opens.*

* Click on

Help

or see

Configuring SNMP, BootP, and DHCP Services

for a description of the

parameters in the BOOTP Relay Agent Interface Table window. Make sure that the Timeout Secs.

parameter is set to the default, 0.

5. Click on

Client I/F

(interface). The BOOTP Client Interface Table

window opens.

6. Click on

Add

. The BOOTP Client Interface Address

window opens.

7. Set the following parameters:

•

IP Address

•

DLCI Number

Click on

Help

or refer to the parameter

descriptions beginning on page A-8.

8. Click on

. The BOOTP Client Interface Table

window lists the client IP interface and the

DLCI number you added.

9. Click on

Done

. You return to the BOOTP Relay Agent

Interface Table window.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 139 140

Komentáře k této Příručce

Žádné komentáře

Avaya Configuring BayStack Remote Access Uživatelský manuál Strana 68

Komentáře k této Příručce

Související produkty a manuály pro Směrovače Avaya Configuring BayStack Remote Access