Avaya Configuring BayStack Remote Access Uživatelský manuál stáhnout pdf (Strana 89)

Site Manager Parameters

308614-14.00 Rev 00

A-3

Parameter: Boot Server Address

Path: Configuration Manager > Protocols > Global Protocols > Net Boot > Global

Default: None

Options: A valid IP address of a TFTP server

Function: When the Boot Image From Network parameter and/or the Boot Config From

Network parameter are set to Enable, this parameter specifies the TFTP server

from which the router will obtain the boot image and configuration files.

Instructions: Use this parameter only when configuring Directed Netboot. Specify the valid

IP address of the TFTP server, in dotted-decimal notation.

MIB Object ID: 1.3.6.1.4.1.18.3.3.2.10.1.3

Parameter: Boot Image Pathname

Path: Configuration Manager > Protocols > Global Protocols > Net Boot > Global

Default: None

Options: A valid path name for the boot image file

Function: When the parameter Boot Image From Network is set to Enable, this parameter

specifies the full path name of the boot image file on the TFTP server.

Instructions: Use this parameter only when configuring Directed Netboot. Make sure that the

file you specify is the valid boot image file on the TFTP server.

MIB Object ID: 1.3.6.1.4.1.18.3.3.2.10.1.4

Parameter: Boot Config Pathname

Path: Configuration Manager > Protocols > Global Protocols > Net Boot > Global

Default: None

Options: A valid path name for the configuration file

Function: When the parameter Boot Config From Network is set to Enable, this parameter

specifies the full path name of the boot configuration file on the TFTP server.

Instructions: Use this parameter only when configuring Directed Netboot. Make sure that the

file you specify is the valid configuration file on the TFTP server.

MIB Object ID: 1.3.6.1.4.1.18.3.3.2.10.1.5

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 139 140

Žádné komentáře

Avaya Configuring BayStack Remote Access Uživatelský manuál Strana 89