
Configuring IP, ARP, RARP, RIP, and OSPF Services
4-14
308627-14.20 Rev 00
Defining the RARP Mapping Table
The RARP mapping table lists the clients on the network that use the router’s
RARP services. You define the router’s MAC address-to-IP address RARP
mapping table as follows:
• Specify the MAC address of each client that will use the RARP services of
this router. The client will include the MAC address that you specify in RARP
broadcasts to the router.
• Specify the IP address corresponding to the value of the MAC address that
you specify. Do not accept the default value (0.0.0.0). When the router
receives a RARP request from the client, it assigns this IP address to the client
and includes it in a response packet.
To specify a client’s MAC address and its IP address, complete the following
tasks:
5. Set the Enable/Disable parameter. Click
on Help or see the parameter description
on page A-35.
6. Click on Apply.
7. Click on Done. You return to the Configuration Manager
window.
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose Protocols.
The Protocols menu opens.
2. Choose IP. The IP menu opens.
3. Choose Reverse ARP. The Reverse ARP menu opens.
4. Choose Map Table. The RARP Map Table window opens.
5. Click on Add. The RARP Addresses window opens.
(continued)
Site Manager Procedure
(continued)
You do this System responds
Komentáře k této Příručce