Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Uživatelský manuál stáhnout pdf (Strana 144)

Configuring IP Exterior Gateway Protocols (BGP and EGP)

8-4

308628-14.00 Rev 00

Using Site Manager

Configuring a Route Reflector Cluster

You can connect multiple route reflectors in a route reflector cluster. Within a

cluster, IBGP route reflectors must be connected in a full-mesh topology.

To configure a route reflector in a cluster, you establish a peer-to-peer session

with one or more reflectors in the same cluster. You can do this with the BCC or

Site Manager.

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

BGP

. The BGP menu opens.

4. Choose

Peers

. The IP Interface List for BGP window

opens.

5. Click on the IP interface for which you

want to edit BGP peer parameters.

6. Click on

BGP Peers

. The BGP Peer List window opens.

7. Click on

Add

. The BGP Peer Parameters window

opens.

8. Set the following parameters:

• Peer Address

•

Peer AS

• Local Address

•

Peer Mode

Click on

Help

or see the parameter

descriptions beginning on page A-10

9. Click on

. Site Manager returns you to the BGP

Peer List window.

10. Click on

Apply

, and then click on

Done

. Site Manager returns you to the IP

Interface List for BGP window.

1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 307 308

Komentáře k této Příručce

Žádné komentáře

Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Uživatelský manuál Strana 144

Komentáře k této Příručce

Související produkty a manuály pro Software Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP)