Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Uživatelský manuál stáhnout pdf (Strana 218)

Configuring IP Exterior Gateway Protocols (BGP and EGP)

A-42

308628-14.00 Rev 00

Parameter: Unnumbered Associated Alternate

Path: Configuration Manager > Protocols > IP > Interfaces

Default: Disable

Options: Enable

Disable

Function: Automatically assigns an alternate associated address to an unnumbered

interface in the event that the primary associated address has gone down. IP

uses the first available interface.

Instructions: Use the alternate unnumbered address option to ensure that the unnumbered

interface has a usable associated address on the router.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.24.1.111

Parameter: ATM ARP Mode

Path: Configuration Manager > Protocols > IP > Interfaces

Default: Client

Options: Client

Server

Function: Specifies whether the router is running as an ATM client or server on this

interface.

Instructions: You must configure one ATMARP server for each logical IP subnet you

define.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.24.1.112

Parameter: ARP Server ATM Address Network Prefix

Path: Configuration Manager > Protocols > IP > Interfaces

Default: None

Options: XX000000000000000000000000 to XXFFFFFFFFFFFFFFFFFFFFFFF

where XX = 39, 45, or 47

Function: Defines the ATM address network prefix of the ATMARP server on your

network.

Instructions: Enter the ATM address network prefix of the ATMARP server on your

network. A complete ATM address consists of a network prefix and a user

part. Use the ARP Server ATM Address User Part parameter to supply the

user part of the ATM address.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.24.1.113

1 2 ... 213 214 215 216 217 218 219 220 221 222 223 ... 307 308

Žádné komentáře

Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Uživatelský manuál Strana 218