Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Uživatelský manuál stáhnout pdf (Strana 228)

Configuring IP Exterior Gateway Protocols (BGP and EGP)

A-52

308628-14.00 Rev 00

Parameter: Address Mask

Path: Configuration Manager > Protocols > IP > Static Routes

Default: None

Options: Based on the network class of the IP address you specified at the Destination IP

Address parameter

Function: Specifies the subnet mask of the destination network. Specifies the supernet

mask of the supernet for which you want to configure a black hole static route.

Instructions: Enter the subnet or supernet mask in dotted-decimal notation. To configure a

default route, enter 0.0.0.0. To configure a black hole static route, enter a

supernet mask.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.5.1.4

Parameter: Cost

Path: Configuration Manager > Protocols > IP > Static Routes

Default: 1

Options: 1 to the value of the RIP Diameter parameter (maximum 126)

Function: Specifies the number of router hops a datagram can traverse before reaching

the destination IP address. The IP router uses the cost value when determining

the best route for a datagram to follow.

Instructions: Enter the number of router hops.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.5.1.5

Parameter: Next Hop Addr

Path: Configuration Manager > Protocols > IP > Static Routes

Default: 0.0.0.0

Options: Any valid IP address

Function: Specifies the IP address of the next-hop router. Defines a black hole route for a

supernet.

Instructions: Enter the IP address in dotted-decimal notation. To configure a black hole

static route, enter 255.255.255.255. If you are configuring a static route to an

unnumbered interface, enter 0.0.0.0.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.5.1.6

1 2 ... 223 224 225 226 227 228 229 230 231 232 233 ... 307 308

Žádné komentáře

Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Uživatelský manuál Strana 228